[chucker]

We got another used 2007 Doosan VC400 Fanuc 21i-MB it has the EZ-GUIDE-I turned on what I am trying to do is get back to the normal Fanuc screen like all our machines is this possible. On our 2013 Oi controls I can switch back and fourth form one to the other I can not figure how to do it on this one.

[Heavy_Metal]

Hi Chucker,

What happens when you push two times on the [GRAPH] button ?

Regards,
Heavy_Metal.

[chucker]

Here are some pics 2 are what you see when you push graph 1 is the ez-guide screen 1 is like my other machines

[dcoupar]

Is there a CUSTOM key?

[chucker]

this is what I get when you push the CUSTOM key

[DouglasR]

Try pushing "PRGM" or "OFST" - I believe that the EZ Guide on 21 series CNCs is turned off by pushing one of the regular Fanuc "Hard keys" such as "PRGM" "POS" etc.

973-618-2425 - Training Coordinator - Doosan

[bertus.nl]

hi
In the thick yello books i have seen some text aboud the "hard keys" and how you can change them.

on my machine i have a [custom] key that gives a menu with 10 choices the last is ezguide.

but i also have a softkey with something like nc g....


vr gr bertus

[DouglasR]

In Custom 1, look at the bottom row of softkeys, one of them may say "NC PRGM" - press it and the original G code screen should return.

[cnc doc]

Fanuc parameter 14974#1=0 will turn off on all Fanuc controls with EZ-Guide.