Ideas for speed and feeds for drilling, and turning Stellite.
1 inch down to .720 and .529 hole about .55 length?
Thanks
Ideas for speed and feeds for drilling, and turning Stellite.
1 inch down to .720 and .529 hole about .55 length?
Thanks
we turn a bunch of it on lathes and sometimes drill but i dont know how itll act on a swiss but for turning we go from 60 to 80sfm
and depending on the drill is it dr or cobalt or what
a dr i would start with 90ish cobalt drill 10 sfm
that stuffs just slow goin
CHOCLATE? THIS IS DOODOO BABY!
Thank you.
Have a good day.