Hey i have a problem regarding alarm 1812 mist lubrication unit 2.
I am 2 weeks into a new job and this is my first time working with okumas. Im getting the hang of the machine but this alarm now keeps on re occuring the second i start my cycle. The oil mist unit is full at the front next to the lube oil. Is there another unit on the machine i should be looking for? also when the machine is running the oil unit is only getting to 0.05 bar of pressure which seeems awfully low? Anyway to crank this up to 0.1 bar i think it should be running at?
Working pressure when machine is running is sitting just below 0.2mpa and mnifold pressure is sitting at 0.05mpa
working pressure should be at 0.22mpa and manifold should be at 0.1mpa
Any help would be great
thanks