i am quickly running out of DAC's and wondering where more can be aquired.
the snapamp i think does not do this and so can i add another kanalog board to the first one?
thanks matt
i am quickly running out of DAC's and wondering where more can be aquired.
the snapamp i think does not do this and so can i add another kanalog board to the first one?
thanks matt
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
Hi Matt,
We don't have an easy way to add more than 8 DACs. Only one Kanalog can be used with KFLOP.
SnapAmp doesn't have any DAC outputs but can be used to drive motors (3Phase/DC/Steppers) directly if they are withing the Voltage/Current capabilities.
Regards
TK
http://dynomotion.com
snap amp just does dc voltage though right?
no ac brushless servo's
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
Hi Matt,
SnapAmp can do 3 Phase Brushless Motors
Regards
TK
http://dynomotion.com
200v ac 3 phase?
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
Hi Matt,
SnapAmp's Supply voltage is limited to 80V. It may work but at lower speed.
Regards
TK
http://dynomotion.com
thats what i thought. i am trying to keep everything line powered and no dc power supplies.
thanks matt
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos