584,860 active members*
5,116 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2010
    Posts
    104

    Mazatrol EIA - Turn off air!

    First off, thanks for any help on this.

    I have a VTC-41L that I purchased and when the machine is on it is constantly hissing air inside the spindle. I remember when I got my Hurco BMC4020 it did the same thing and I was able to go into parameters and shut that off (I only machine aluminum typically).

    Anyone happen to know the param for this? OR is this not a thing on these machines?

    Thanks again,
    Henry

  2. #2
    Join Date
    Aug 2009
    Posts
    1567

    Re: Mazatrol EIA - Turn off air!

    ...don't think you really want to turn OFF the Spindle Air completely because, this positive air pressure keeps the Coolant/chips out of the spindle bearings...I would just look for the Air Regulator that controls the pressure and tune it down to save air.

Similar Threads

  1. Mazatrol EIA Sub Program Help
    By newguy81 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 05-06-2014, 03:47 PM
  2. mazatrol to eia problems
    By mikey B in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 10-29-2013, 10:46 PM
  3. Mazatrol sub program in EIA
    By schmitty9 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 02-07-2011, 08:03 PM
  4. Mazatrol EIA T zero return
    By davehall in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 02-18-2008, 08:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •