584,841 active members*
4,352 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2013
    Posts
    7

    Mori Seiki return to Microsoft Windows

    Hey guys. Im COMPLETLY new on using CNC machines. (Im studying to become a CNC operator). Anyway, out of pure interest i was hoping any of you guys could tell me how i get back to microsoft windows from the Mori Seiki menu?

  2. #2
    Join Date
    Feb 2009
    Posts
    6028
    Depends on what version of Mapps your running. I have done it to modify the online manuals on the Mapps 4, but fair warning, this is NOT your standard windows, its embedded XP, and no real reason to get in there. One false move and you WILL need a service call to re-load software.

  3. #3
    Join Date
    May 2013
    Posts
    44
    Quote Originally Posted by underthetire View Post
    Depends on what version of Mapps your running. I have done it to modify the online manuals on the Mapps 4, but fair warning, this is NOT your standard windows, its embedded XP, and no real reason to get in there. One false move and you WILL need a service call to re-load software.
    What he said!

  4. #4
    Join Date
    Feb 2017
    Posts
    32

    Re: Mori Seiki return to Microsoft Windows

    I run an NHX-6300, so what is hiding in the windows software? I need access to probe calibration data, or possible grid shift to correct a y axis probe shift. Money is too tight for service calls.
    And how would you go about backing up windows? And reinstalling if need be? The machine is about 2.5 years old and don't know what mapps.

  5. #5
    Join Date
    Feb 2009
    Posts
    6028

    Re: Mori Seiki return to Microsoft Windows

    Nothing much in the windows side at all. A basic operating shell more or less. None of what you want to do is in there anyways. Grid shift is in parameters just like anything else. Same with probe calibration. Re install of windows is not possible by you, it requires a special formated card with mapps loaded. It may be possible to use norton ghost to image the system compact flash card on a off line pc, never tried.

    Sent from my SM-T813 using Tapatalk

Similar Threads

  1. Mori Seiki zero return / home position
    By Her_cnc in forum Mori Seiki lathes
    Replies: 1
    Last Post: 11-14-2013, 01:09 AM
  2. Mori seiki TV 30
    By sanroyal.e in forum Mori Seiki Mills
    Replies: 2
    Last Post: 02-28-2012, 06:35 PM
  3. Mori 11T zero return problem
    By wmpy in forum Fanuc
    Replies: 14
    Last Post: 10-15-2011, 08:15 PM
  4. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  5. Mori Seiki SL-35
    By n8ebear30 in forum Mori Seiki lathes
    Replies: 2
    Last Post: 04-28-2011, 03:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •