Why SteelTailor CNC cutting machine is showing G92 error on screen while pressing start button?
The problem may be caused by configuration, please cancel WENTAI, you can find this option at AUTO-ASSI-WENTAI, see the pictures below, press F6 [WENTA] to cancel it.
Attachment 211472
Thank you for your attention to SteelTailor.If you have any question about portable CNC cutting machine. Just leave message here. We will be very glad to help .
Results 1 to 2 of 2
Threaded View
-
12-03-2013, 03:49 AM #1
Registered
- Join Date
- Nov 2013
- Posts
- 171
SteelTailor machine is showing G92 error on screen while pressing start button.
SteelTailor--The world leader of portable CNC cutting machine
www.steeltailor.com
Reply With QuoteSimilar Threads
-
When we press “Start” button,Why SteelTailor CNC cutting machine does not move?
By Steel Tailor in forum Other Machine TopicsReplies: 0Last Post: 12-18-2013, 08:08 AM -
When I start to cut, there is no arc from SteelTailor CNC cutting machine torch?
By Steel Tailor in forum Other Machine TopicsReplies: 0Last Post: 11-28-2013, 08:01 AM -
Why the torch of SteelTailor machine will go up to the top after I start to cut?
By Steel Tailor in forum Other Machine TopicsReplies: 0Last Post: 11-19-2013, 03:42 AM -
laser with MPC 6525 - laser blocks after pressing the START button
By WendyL in forum Laser Engraving / Cutting Machine General TopicsReplies: 3Last Post: 08-27-2013, 07:39 AM -
Changed screen, now Start button doesn't work.
By jderou in forum Screen Layouts, Post Processors & MiscReplies: 0Last Post: 03-20-2006, 02:57 PM
Posting Permissions
