584,862 active members*
5,277 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2004
    Posts
    389

    Mach3Turn - 1st 'Beta' release of the SilverBlue Screenset for lathes

    Hi all,

    Finally after a short delay the Silver Blue Screenset for Mach3Turn is ready for test.

    There has been no attempt to add extra functions to these screens. They have been done purely by request following the Mill screens we released.

    Credit to the original author of the screenset interface. We have only put a wrapper around it. (We don't have lathes so cannot even test it fully !)

    The DarkBlue screenset will follow shortly once I manage to bribe Mr Bean into it.

    Please report any bugs etc but note that we don't intend to add new features.

    The screenshots below give you a taster.

    Again, full credit to Beano on his photoshop skills. We hope you like the look.


    Team InsomniaX

    More info here :-

    Mach Forum
    Screenset can be download from :-

    DOWNLOAD
    Attached Thumbnails Attached Thumbnails FrontScreenShot.jpg   ManualScreenShot.jpg   Auto.jpg   AutoCycle.jpg  

    ToolTable.jpg   Diagnostics.jpg  

  2. #2
    Join Date
    Feb 2004
    Posts
    2337
    Another very nice adition to the choice of Mach screens.

    Keep up the fantastic work guys.

  3. #3
    Join Date
    Nov 2004
    Posts
    389
    The Mach Blue version of this screenset is now available....

    Same link as above for location.

    Cheers
    Attached Thumbnails Attached Thumbnails 1.jpg   2.jpg  

  4. #4
    Join Date
    Nov 2004
    Posts
    389
    Lathe files have been updated to include the MPG screen which we missed from original set.

    You will need to download the installers again if you want the new set.

    Cheers
    Attached Thumbnails Attached Thumbnails MPG-blue-shot.jpg   MPG-sb-shot.jpg  

  5. #5
    Join Date
    Jan 2005
    Posts
    2010
    can't reach the down loads, no page available.

    I have another question as well. I would be much more comfortable with Mach Turn if I had jog capabilities on the "Auto Screen".

    Many times I need to move the tool as soon as the g code has run and find switching back and forth between screens awkward and time consuming.

    As yet I'm not able to modify the screens in turn. Anyone got a hint?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •