When I started in CNC I was running LeBlond Makino's with Fanuc 6M's. One of the weekly duties was to replace the GE 388 Mini-Lamps that had blown on the controls maybe one or two maybe zero would need replaced. My new job I am running a machine with a Fanuc 150i-M and the same 388 are used. Is there an alternative to the 388?
Thanks,
Larry
:cheers:
Thread: GE 388 Lamp
Results 1 to 4 of 4
-
05-10-2006, 04:39 PM #1
Registered
- Join Date
- May 2006
- Posts
- 82
GE 388 Lamp
-
05-10-2006, 08:08 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
If you can find them in that base type, Multi-LED is the way to go now, you may have to confirm the polarity on the socket.
They make them in a few of the common bases.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
05-10-2006, 09:30 PM #3
Registered
- Join Date
- Jan 2005
- Posts
- 746
It seems to me that I've seen that style of bulb somewhere with an LED intergrated into it. I don't remember the voltage, I think it may have been the local electronics surplus store. I'll keep a lookout for them.
If it's not nailed down, it's mine.
If I can pry it loose, it's not nailed down.
-
02-01-2010, 08:20 PM #4
Registered
- Join Date
- Apr 2004
- Posts
- 79
Check this
http://search.digikey.com/scripts/Dk...&name=L1036-ND
DrewIf I had something important to say it would be here.
Reply With Quote
Posting Permissions
