Hello All
First please forgive me if I have posted this in the wrong area. I am new here and getting my learn curve started.

A freind of mine had an old line trace oxy/acet cutter setup witch he gave me to play with. the problem is I cannot find any manuals or info on the stepper motors for this machine. The optical trace system I beleive is starting to fail it tries to follow a pattern but runs away, not something you would walk away from while in operation for sure......!!!

Anyways I am thinking that I may just take the trace system off and put a small Z axis on it for a laser or a plasma torch.

I would hope that someone could at least give me some info on the motors so I could get the electrcal ratings and such. a manual would be great but not sure if they are still avalible.

Im posting a few pictures, and any help would be great.

Thank You!
Neil
Attachment 213418
Attachment 213420
Attachment 213422
Attachment 213424
Attachment 213416