Trying not to cross post but I think I posted in the question in the wrong area and havnt seen any replys so it made more sense to post it over here...

Ok, first off I am new to this CNC stuff, have done alittle home work and think I have the combo of stuff I want to use, I am still in the lay out phase of things and trying to get a idea of what I'm going to need and $$ amounts, but mostly looking for feed back if this combo of stuff will all work together

The machine I want to build is a 5 foot x 10 foot CNC plasma w/gantry... BUT...
as I said I'm new to this CNC stuff so I dont want to build a big unit off the start so the plan is to build a 2 foot x 3 foot work area gantry router/engraver

2'x3' gantry router
Parts (will this work together?)

Parker servo motor DC, SM231-AE-NGSV or SM232AE-NTQN oor CM232AE-01419 (havent found anything about a parker CM series)
Specs Link

Rutex R992H driver or the R2030?

MP-1000 THC Specs
Software will be Mach3
If anyone knows if this combo of parts will work together it would be great