[roberto123]

Hello Guyz;

I'm trying to run a Dyna 3300-B lathe with mitsubishi Meldas 50L/50G control. I don't have the operation manual nor the programming manual, PLEASE! can someone help me with the information :bs:

[Fastest1]

I have a manual or two on the 3000 & 3000H. Pm me your email and I will send what I have. If it would be of help.

[Al_The_Man]

There are some manuals on the MEAU site for the 50L. Look in Documentation.
For Operator manuals you may have to look at the 500L as they are close.
Al.

[roberto123]

Nothing can be found in internet please fastest1, can you help me?... I will be grateful and help you if you need.

[Fastest1]

Roberto, did I not send you the manual? I will be glad to send what I have. Pm me your email (I believe you already have, I am mobile at the time of this post.

[dammachines]

Unfortunately, I don't think the Dyna 3300 shares much if anything in common with the 3000 or 3000H models.

[Jose_Monroy]

Roberto

Puede bajar el manual con la siguiente liga:

https://www.dropbox.com/s/57qocmk8y3...press.pdf?dl=0

Saludos...

Jose Monroy