585,973 active members*
4,067 visitors online*
Register for free
Login

Thread: Ge-Fanuc 21imb and HSM

Results 1 to 3 of 3
  1. 05-12-2006, 11:15 AM #1
    serkanc
    serkanc is offline Registered
    Join Date
    May 2006
    Posts
    8

    Ge-Fanuc 21imb and HSM

    I have a GeFanuc 21imb with the machine Spinner VC560 12000rpm... I want use HSM with G05.1 Q1, as machining there stands "AICC" or "AI NaNo", but shakes more than normal when changing his direction along y or x axis ? Can be there a parameter which help me, or is there any g-code whic must be off if i want to use HSM? Can anyone help me ?

    Serkan
    Reply With Quote Reply With Quote
  2. 09-24-2006, 05:27 PM #2
    Omega
    Omega is offline Registered
    Join Date
    Sep 2006
    Posts
    2
    Serkan,

    For the AICC to work, I think you have to command G49
    and the code for higher feed compensation is Q4 (smoothest)...
    Q1 is for fastest...

    G49 (put this at the beginning of the tool)
    G332 R4. (Turn On Ai Nano to tightest level of accuracy)
    G05.1 Q1 (accurate arcs)
    ...

    You must turn off AICC at the end of each tool (before tool change).

    Omega
    Reply With Quote Reply With Quote
  3. 10-13-2009, 01:40 PM #3
    machill
    machill is offline Registered
    Join Date
    Oct 2009
    Posts
    11

    Spinner VC560 machining

    Please contact Cenk KOC.

    At [email protected]

    They can help with your requirement.

    very best,

    Mac
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules