584,802 active members*
4,926 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > UG NX > Chamfer operation
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2010
    Posts
    86

    Chamfer operation

    Hi to all,


    Would someone help me with the correct mill type operation to machine a chamfer in Unigraphics Nx6.

    Thanks in advance.

  2. #2
    Join Date
    Feb 2006
    Posts
    146
    For a 2 axis cut use Planer mill

    for a 3 axis cut use profile 3D

  3. #3
    Join Date
    Sep 2010
    Posts
    86
    Thank you Camster. Your input is more than helpful.

Similar Threads

  1. 3D Chamfer
    By hkenuam in forum BobCad-Cam
    Replies: 4
    Last Post: 04-02-2013, 02:37 PM
  2. Chamfer Help
    By Guppie in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 01-05-2013, 03:43 AM
  3. tapped hole chamfer with iscar chamfer tools
    By dcutler35 in forum Mastercam
    Replies: 7
    Last Post: 12-07-2012, 02:30 PM
  4. Chamfer chamfer mill or ball mill
    By fjbart70 in forum Mastercam
    Replies: 4
    Last Post: 03-11-2011, 06:27 PM
  5. Chamfer
    By CharlesM479 in forum Solidworks
    Replies: 3
    Last Post: 04-12-2007, 05:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •