Q: When we press “Start” button,Why SteelTailor portable CNC cutting machine does not move?

A:
First check the motor enable switch is ON or not,
Second, SteelTailor machine may not be getting “OK to move” signal from the plasma machine, go to SETUP--PLASMA—ARC- FEEDBACK (0/1), set it to 0.and test if SteelTailor machine can work properly now. if SteelTailor machine cannot work properly, check the FINISH signal wire coming from the plasma machine.

More information about SteelTailor FAQ,Pls visit:
FAQ - Parts&Service - SteelTailor offers portable CNC cutting machines,portable table plasma cutting machine,CNC plasma and flame cutting machine,cnc plasma cutters