[nice-day]

I need help with Fanuc pin-assignment connector (JF-1 / the pulse coder cable), I have Fanuc driver model A06B-6117-H105 (E) Fanuc Servo Amplifier Alpha iSV 1-80, and I’m having problem with cable between the rotary table (Parkson model: PNC-201) and the Fanuc driver, the problem is that the connector (on the side of the Fanuc driver) is totally broke and I lost some of the pins from the connector itself (it’ll be a hell of work the replace the whole cable) for that I bought new connector for the driver side (JF-1) but I don’t know the pin-assignment for it.
Please I need help to connect that connector the right way, I can do the cable buzzer test from the motor side to get to the right end for it.
Rotary table information:
1- Model: Parkson PNC-201
2- Motor model: Fanuc A06B-0223-B001
3- Pulse encoder model: A860-2005-T301

Fanuc driver information (4th axis):
1- Fanuc Servo Amplifier Alpha iSV 1-80, model: A06B-6117-H105

P.S. kindly check the pictures I attached for the rotary table information.

Thanks

[Dr.Bell]

Attachment 214590
Here you go

[mxrtin]

I had the same problem in a Fanuc oi-mb but my problem is that i don't know how to connect from the jf1 to the jn2 (japan aviation connecto..the one with letters instead of numbers). I wanted to know what number from the jf1 is connected to each letter of jn2.
Sorry if I had a bad english.

thanks for your time