Is it possible to have an stereolith part made with a resin appropriate to do investment casting? This probably isn't a new idea, I've just never heard of it.
I'd like to mock up a falling block rifle reciever using STL, and then have it cast in 4130 if STL can be used. Otherwise it is a bunch of machining for me, and farming EDM or shaper work. Thanks.
Thread: STL and casting
Results 1 to 2 of 2
-
05-15-2006, 08:42 PM #1
Registered
- Join Date
- Jun 2003
- Posts
- 67
STL and casting
-
05-15-2006, 10:01 PM #2
Registered
- Join Date
- Apr 2006
- Posts
- 109
yes it will work, but somethings have to be thought out carefully
Reply With Quote
Posting Permissions
