Hi All-
Got SW 2013 and BCV3
How come when I open up a New sheet in BC an check-
Milling Tools-Part-Current Settings-the Max spindle speed is 10000
even though-
Milling Tools-Default-Current Settings-the Max spindle speed is set at 4000
Any Idea's thanks rckdef
Thread: Default Max Spindle Speed
Results 1 to 1 of 1
-
12-30-2013, 05:46 PM #1
Registered
- Join Date
- Jul 2010
- Posts
- 172
Default Max Spindle Speed
Reply With QuoteSimilar Threads
-
Default rapid speed?
By orion_134 in forum Haas MillsReplies: 4Last Post: 12-14-2013, 12:52 AM -
Help chosing a spindle speed sensor to indicate spindle speed in mach3
By Draax in forum Mach LatheReplies: 1Last Post: 08-02-2013, 10:07 PM -
Spindle default at 250
By cuttingedgepart in forum Tormach Personal CNC MillReplies: 4Last Post: 10-23-2010, 02:57 AM -
Default kernal speed in Syil inch profile
By thackman in forum Syil ProductsReplies: 2Last Post: 12-17-2007, 10:41 PM -
Default feed override and manual jog speed settings?
By InspirationTool in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 02-22-2007, 11:04 PM
Posting Permissions
