Well, after receiving numerous pallets of Mitsubishi CNC control parts, I discovered 75%-90% of it is for the 310/320/330 series.
So I got everything organized pretty much laid out and the racks / chassis emptied out of cards/boards.
I need to configure the best system out of all the boards I have available, and there seems to be quite a variety including the battery board and power supplies.
After taking a extensive inventory, here are the boards I have the most of.
MC323
MC303
MC301
MC724
MC721
MC611
MC411
MC413
MC111
MC433
MC021
MC011
MC031
PD19
MC062
These I am guessing should be installed to a chassis/rack labeled FCA-3**M.
Is there a particular version of the Meldas that these boards will work best with?
Theres 16 odd boards here and I can't seem to find good descriptions of each. Can anyone tell me what boards these are?
I do have a few MB941 CRT/MDIs for the 310/320/330.
I also understand that this version requires the Freqrol SF & SFJ type but I can't locate the manuals. What other drives are compatible?
Is there a description of the wiring to the PD19 supply terminals?