585,589 active members*
2,859 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > help with Error 29 on a large arc

Thread: help with Error 29 on a large arc

Results 1 to 2 of 2
  1. 01-09-2014, 07:48 PM #1
    Benchsmith
    Benchsmith is offline Registered
    Join Date
    Feb 2010
    Posts
    5

    help with Error 29 on a large arc

    Here is what I have: I am trying to create a large arc. I get the error code 29. is there a way to over come this?
    (my code)
    N10G17G40G90G80G98
    N100(*)
    N102(1/2*MILL)
    N104G53
    N106G54X7.50Y-60.000Z2.437
    N108G53
    N110G44
    N112G0X60.Y-30.Z1.5
    N114T1.1
    N116M6
    N118G1F300
    N120S1400M3
    N122G54
    N124G44
    N200G00G41X24.797Y1.122
    N202G01Z-5.7500F75
    N204G01Y14.872F150
    N206G02X92.797R463.025
    N208G01Y1.122
    N210G01X24.797
    N212G00G40Z-3.000
    N9000G53
    N9002G00Z-0.M5
    N9004G00X0Y0
    N9008M30
    Reply With Quote Reply With Quote
  2. 01-10-2014, 02:28 AM #2
    Kiwi
    Kiwi is offline Member
    Join Date
    Jul 2003
    Posts
    1220
    Suggest you add the Y14.872 to Line N206
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. A SERVO ERROR TO LARGE.
    By Crashmank1 in forum Community Club House
    Replies: 0
    Last Post: 07-18-2013, 06:05 PM
  2. 104 yservo error too large need help.
    By mayhem in forum Haas Mills
    Replies: 6
    Last Post: 11-07-2011, 10:37 PM
  3. Error 187 (M) B servo error too large
    By jimcooptcam77 in forum Haas Mills
    Replies: 41
    Last Post: 10-03-2011, 05:40 PM
  4. HAAS VF-2 (104 ALARM) Y SERVO ERROR TOO LARGE
    By joanpim in forum Haas Mills
    Replies: 3
    Last Post: 09-12-2011, 10:24 AM
  5. alarm 105 (z servo error to large)
    By PilzMachine in forum Haas Mills
    Replies: 8
    Last Post: 03-11-2011, 09:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules