[BOATDUDEGUY]

can anyone help us
we cannot get the z overtravel to realase, its to far positive, what ive done with dossans in the past is hold the erelease and move it into the correct area but this control dont have an erelease, is what im told

any and all help is appreciated

[ifixcnc]

Some machines use power on and OT bypass to get off the limit. Worse case pull the cover and hand crank it.

[dcoupar]

I believe if you power off, then hold the P and CAN keys while the control powers up, it will ignore the soft OT until you do a ref return.