Hi
how to change machine type default metric to inch in macam5
the settings won't do it
it appears to be permanent
hope you can help
much appreciated
don
Hi
how to change machine type default metric to inch in macam5
the settings won't do it
it appears to be permanent
hope you can help
much appreciated
don
Sorry, not a mastercam user although in other software stuff like that is in prefferences. If all else fails remember 25.4, and keep a calculator open.
Bob La Londe
http://www.YumaBassMan.com
Change your config file. And for it to be default needs to be the startup file.
Sent from my HTC One using Tapatalk
You must contact the person who provided the camera services locally he can batter understand your problem and fix it easily. Most of the time there is the error with zipjobs setting and you need to fix wisely.
hi
if you machine� �is inch,you can � ��lt+f8 in master cam to change i� �ch mode.
hi
if you machine� �is inch,you can � ��lt+f8 in master cam to change i� �ch mode.