[Darkphoenix]

Hello Im working on 2 Leadwell's and im trying to get them on a network

We have a Leadwell v40L Sinumerik 828D and a Leadwell v40 Sinumerik 828D Basic M
I'm trying to find out where/how to edit network settings or does the OS connect via DHCP
Do thy have FTP/SMB/VNC or some other way to transmit data
We are Currently using USB for Program Transmission but we wan to have network communications like our Fanuc's

If someone Can Give Me a link to a how-to or a Manual This Would be Appreciated
I have Been looking and i cannot find anything in the manuals i have or on Google

Thank You

[Alan Wang]

Hello,
You can use RCS commander software to connect both CNC to transfering part program if you don't have "Network Management" Option.
If you have this option then you can set an network share to you PC share folder under "Program Manager" screen. In order to make it works you need to setup.You can find related information under this Siemens DocOnWeb site:
https://www.automation.siemens.com/d...13_e&scope=all
and how to setup network drive is decribe in this chapter.
I hope it helps

Alan

[solidcamx]

hi,
I have to SolidCAM.
[email protected]