Hello all,
We are facing a problem in a turning center with 0i-TC control.
When we switch On the machine, machine comes to LOADING GRAPHIC DATA screen but stops there with CRC ERROR! as in attached picture
Attachment 219234
After switching ON/OFF for several times machine boots up, but machine hangs after 10-20 min.
While machine hangs Cycle can be run but we can't operate MDI key board.
What we have done already..
1.Disconnected all connectors from motherboard but problem remains the same.
2.Took out Display control card, CPU, FROM/SRAM card after cleaning inserted again but condition same.
Please help here................