584,837 active members*
5,387 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2014
    Posts
    2

    Heidenhain TNC 124 service manual needed

    Gentlemen,

    I am trying to repair an old TNC 124 control unit. It powers up with a overheat error.

    Somebody replaced the fan under the control PCB (perhaps maintenance) and did not fix the problem.

    I am looking for the thermal measuring circuit.

    Thank You

  2. #2
    Join Date
    Jan 2014
    Posts
    2
    I was able to repair this unit, the repair folks at Heidenhain explained that the unit was no longer repairable, but gave me a few tips, It came down to the power supply for the regulated -12 volt and -15 volt missing the supply B+. There are (3) 470 uf caps that leaked slightly on the PCB, and cause enough corrision to disconnect the supply from both regulators.

  3. #3
    Join Date
    Dec 2017
    Posts
    3

    Re: Heidenhain TNC 124 service manual needed

    Gentlemen,

    I am trying to repair an old TNC 124 control unit. It powers up with a overheat error.

    Somebody replaced the fan under the control PCB (perhaps maintenance) and did not fix the problem.

    I am looking for the thermal measuring circuit.

    Thank You

  4. #4
    Join Date
    Aug 2010
    Posts
    5
    Quote Originally Posted by MarcoCabezas View Post
    Gentlemen,

    I am trying to repair an old TNC 124 control unit. It powers up with a overheat error.

    Somebody replaced the fan under the control PCB (perhaps maintenance) and did not fix the problem.

    I am looking for the thermal measuring circuit.

    Thank You
    Hi Marco
    I’m also looking for the service manual and the software PLC.exe and PLCmon.exe for the TNC 124.
    Did you have any luck.
    Please share the link if possible.
    Thanks.

Similar Threads

  1. Schematic / service manual needed for Sugino Self Center V8
    By lion_rapid in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 10-22-2012, 07:32 PM
  2. CNC Turret Punch Press Machine: Aquilla 1250 service manual needed
    By jelajahborneo in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 10-11-2012, 08:33 AM
  3. Heidenhain TNC 407 service/repair
    By Finnur in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 12-06-2010, 10:09 AM
  4. Fanuc service manual(s) needed!
    By Die61 in forum EDM Discussion General Topics
    Replies: 1
    Last Post: 10-25-2010, 03:09 AM
  5. Service manual needed DWC200
    By tcforge in forum EDM Discussion General Topics
    Replies: 2
    Last Post: 01-21-2009, 06:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •