I am looking for some of that "track" that the wires go inside of on a cnc machine that will roll up as the x axis moves so I do not have to suspend my wires from above. I would like to see a few dfiierent sizes so maybe I can get a small set for my y axis as well.
Results 1 to 10 of 10
-
05-27-2006, 01:27 AM #1
Junior Member
- Join Date
- Mar 2006
- Posts
- 233
wire guide/track for cnc machine...
-
05-27-2006, 01:43 AM #2
Registered
- Join Date
- Jan 2005
- Posts
- 746
http://www.igus.com/ is one manufacturer.
If it's not nailed down, it's mine.
If I can pry it loose, it's not nailed down.
-
05-27-2006, 08:48 PM #3
Junior Member
- Join Date
- Mar 2006
- Posts
- 233
Thats the stuff but it gives no price.... this is the stuff I am looking for if anyone else knows...
-
05-28-2006, 12:13 AM #4
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Mcmaster carr carries it. www.mcmaster.com Search "cable carriers"
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
05-28-2006, 01:53 AM #5
Registered
- Join Date
- May 2006
- Posts
- 106
as does MSC.com heres the link: http://www1.mscdirect.com/CGI/N2DRVSH
-
05-28-2006, 04:17 AM #6
Registered
- Join Date
- Dec 2005
- Posts
- 3319
Don't forget Grainger
-
05-28-2006, 07:07 AM #7
www.joescnc.com
- Join Date
- Aug 2004
- Posts
- 3215
Has anyone tried to make their own, maybe from 1/4" mdf for the sides or 1/8-1/4" plastic then use a bolt/screw/pin to hold together, would be alot cheaper but only for diy, Hmmmm well i guess that will be another little addition to my CNC Model 2006 machine.. lol
Joe
-
05-28-2006, 12:56 PM #8
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Solsylva made his own. Info on his website.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
05-28-2006, 03:59 PM #9
Company Representative
- Join Date
- Feb 2004
- Posts
- 1086
I still have lots of this stuff for sale in the classifieds section. I'm selling it for $10/meter, or $25 for 4 meters. Email me at ahrenkj AT yahoo DOT com if interested.
-
05-28-2006, 04:55 PM #10
www.joescnc.com
- Join Date
- Aug 2004
- Posts
- 3215
Yea i had seen his befor made from a 2x4 i think, it looked kinda bulky and heavy did not care for it to much, thats why i mentioned 1/4" mdf sides and pins to hold together.
Originally Posted by ger21
Reply With Quote
Posting Permissions
