[MrCiopek]

Hi, who maybe have a postprocessor for hermle c50u with five axis (C+A axis - rotary table) on heidenhain itnc 530 or only heidenhain itnc530 five axis (AC rotary table) for other machine.

Thanks for reply!

[GACH]

Hello there,

Is this something you might need?
iTNC530_5axisAC.zip

It's in Czech I believe, but you can always change that manually in the Code Wizard File. (I found it on www.camservis.cz/edgecam-frezky/) There's alot of post processors over there to be discovered.

Take care, and if you need any help feel free to contact me and I'll do my best to help you.

[MrCiopek]

Hi, i see this postprocessor. I have question, do you have maybe better postprocessor?

[GACH]

Hello,

Sadly, I don't have one for a Hermle machine. We used the TNC-template to create our own, we've only done some minor changes and it works like a charm in our machines.