Originally Posted by
offthewall
I have a G540 controller with an ethernet Smoothstepper. I also have an external box that plugs into my controller that had plugs for my home switches, and has a probe jack. My question is can I plug the touch plate into my probe jack, and how would I wire the touch plate? My probe jack is Port 1, Pin 13.
Also, from reading the threads, I can wire together the movable plate, and the permanent plate? Do I run a wire from the plates to Pin 13, and a separate wire to ground? Would I need to use a alligator clip if my machine is grounded?
Any help is much appreciated.