I'm doing a SX-3 Mill conversion, and have got stuck..

I have Three Drives ( 1x KL8060 + 2x KL5040 ) wired up to Port 1, Outputs 2-9 via a C25 Breakoutboard

( 2 - XStep, 3-X DIR, 4- YStep, 5 YDirection, 7- Z Step, 8- Z Direction )..

The C25 is sitting on a ESS ( Ethernet Smooth Stepper )..

I've installed Mach 3 and the plugin, and set up the IP addressing so it all talks. Mach3 can see the ESS..

I'm now completley confused as to how i'm supposed to configure all the settings.. Can anyone help?