585,715 active members*
4,077 visitors online*
Register for free
Login

Thread: esab pcm-1125 using for a cnc plasma table

Results 1 to 2 of 2
  1. 02-04-2014, 08:59 PM #1
    callcbm
    callcbm is offline Registered
    Join Date
    Dec 2005
    Posts
    7

    esab pcm-1125 using for a cnc plasma table

    I have a chance to buy a Esab pcm 1125 New for 500 dollars. No its not hot the owner bought a 460 v by mistake. I have 208 v but I also have a Auto transformer. It has a 460 v tap. My Question is it has a High frequency start I'm using Candcnc lcth. Any one have any luck on this
    Thanks Randy
    Reply With Quote Reply With Quote
  2. 02-05-2014, 06:07 PM #2
    jimcolt's Avatar
    jimcolt
    jimcolt is offline Registered
    Join Date
    Jan 2008
    Posts
    2247
    I suggest contacting CandCNC. Yes, you likely will have trouble if you do not ground, shield, isolate and filter things perfectly.

    Jim Colt

    Quote Originally Posted by callcbm View Post
    I have a chance to buy a Esab pcm 1125 New for 500 dollars. No its not hot the owner bought a 460 v by mistake. I have 208 v but I also have a Auto transformer. It has a 460 v tap. My Question is it has a High frequency start I'm using Candcnc lcth. Any one have any luck on this
    Thanks Randy
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. ESAB pcm1125 plasma not starting arc??
    By mcArch in forum Waterjet General Topics
    Replies: 14
    Last Post: 04-07-2013, 08:52 PM
  2. Esab Shadow 2 Plasma/Oxy
    By diyengineer in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 01-02-2013, 09:14 AM
  3. Will An ESAB PCM-1000i Work On A CNC Plasma Table?
    By RUN-A-MUCK in forum Waterjet General Topics
    Replies: 1
    Last Post: 03-23-2011, 03:00 PM
  4. manual height adjustment esab plasma
    By jonrob in forum Hypertherm Plasma
    Replies: 1
    Last Post: 10-20-2010, 07:42 PM
  5. Looking for ESAB 875 Plasma Consumables
    By robo_plasma in forum Waterjet General Topics
    Replies: 1
    Last Post: 01-10-2007, 02:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules