Hi , I have a Bridgeport BPC 320H with Fanuc 6MB. I'm getting the alarm 2013 Magazine Servo unit alarm..It works on machine switch on first thing then after I run a few parts I get the alarm..if I reset the alarm with the power stop button I can re home the machine and re home the magazine no problem..
I'm getting the red PAL (position alarm?) light coming on at the A20B-0010-0100/02B board which seems to work the magazine servo drive. Is the 2013 alarm a spindle orientation alarm on Fanuc 6..?
Are there diagnostics I can look at for the orientation etc..?
Many thanks in advance
John
Results 1 to 1 of 1
-
02-08-2014, 02:03 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 179
Alarm during tool change on a Bridgeport BPC 320H with Fanuc 6MB11
Reply With QuoteSimilar Threads
-
Alarm during Tool Change on Bridgeport 320H
By ChrisB in forum Bridgeport / Hardinge MillsReplies: 6Last Post: 02-10-2014, 03:49 PM -
Cant tool change alarm AL-42 Toyoda Horizontal Fanuc 18
By Jedi in forum ToyodaReplies: 1Last Post: 02-08-2013, 12:05 AM -
I need help - BRIDGEPORT BPC-320H
By isaacmor in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 03-25-2012, 01:38 AM -
Bridgeport BPC 320H spindle servo alarm
By Ronogurek in forum DNC Problems and SolutionsReplies: 0Last Post: 02-02-2011, 03:47 PM -
Alarm during Tool Change on Fanuc OM-Model A
By ChrisB in forum FanucReplies: 1Last Post: 07-31-2006, 06:19 PM
Tags for this Thread
6mb,
alarm,
board,
bridgeport,
change,
diagnostics,
drive,
fanuc,
home,
light,
machine,
magazine,
orientation,
parts,
position,
power,
problem,
reset,
servo,
servo drive,
spindle,
spindle orientation,
switch,
tool,
tool change
Posting Permissions
