585,974 active members*
4,458 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Puma 240 gives an error 2023

Thread: Puma 240 gives an error 2023

Results 1 to 2 of 2
  1. 02-10-2014, 05:19 AM #1
    StaJlArt
    StaJlArt is offline Registered
    Join Date
    Dec 2013
    Posts
    8

    Puma 240 gives an error 2023

    Puma 240 gives an error 2023
    "Each tool indexing is not finished within 10 sec.After toolindex command (manual or auto)".
    1 tool causes no problems. For all other error 2023, sometimes changes sometimes not. But the error is constant.

    I would be grateful for your help.
    Reply With Quote Reply With Quote
  2. 02-10-2014, 10:53 AM #2
    StaJlArt
    StaJlArt is offline Registered
    Join Date
    Dec 2013
    Posts
    8
    Problem was solved.
    Helped standard [Machine Home setting methode] with parameter 0.8.001 then 1 - tool position.
    First put the wrong value, then the right. The machine worked.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. HELP! kia lathe al 2023 alarm problem
    By kimorbrand in forum News Announcements
    Replies: 2
    Last Post: 11-14-2023, 10:38 AM
  2. PUMA 2000sy VS PUMA 2100sy
    By GreggC in forum Daewoo/Doosan
    Replies: 3
    Last Post: 10-03-2013, 11:51 AM
  3. Puma 8S Spindle Amplifier error code 34
    By naveng in forum Daewoo/Doosan
    Replies: 1
    Last Post: 12-30-2009, 05:02 AM
  4. 940 pcb error puma 8s
    By inderan2005 in forum Daewoo/Doosan
    Replies: 1
    Last Post: 07-22-2008, 01:44 AM
  5. puma 8s 940 pcb error
    By inderan2005 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 07-18-2008, 02:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules