i've been programming this machine for a while and have not run into this one...
"alarm 705 approach point error"
I checked the programming manual or whichever one it was and found an alarm list which did not include 705.
the machine is a vtc 200b.
i tried entering in coordinates and using autoset values. i dont know what the hell the problem is, all im trying to do is a simple line in/circle to make softjaws.
Thread: mazatrol pc-fusion 640 error....
Results 1 to 4 of 4
-
06-02-2006, 06:39 PM #1
Registered
- Join Date
- Mar 2006
- Posts
- 10
mazatrol pc-fusion 640 error....
-
06-02-2006, 09:51 PM #2
Registered
- Join Date
- Mar 2006
- Posts
- 10
im also getting a 704 tool interference error that im not sure how to fix. this alarm is also not in the book.
-
06-02-2006, 09:55 PM #3
Registered
- Join Date
- Mar 2006
- Posts
- 10
the 704 error had to do with having my toolpath overlap the beginning of the cut when it finished. odd. still dont know whats up with the 705.
-
06-03-2006, 12:42 AM #4
Registered
- Join Date
- Mar 2005
- Posts
- 988
This is from my alarm book......
705 Approach Point Error
Cause..... The approach point cannot be obtained
Action..... Reduce the tool diameter, the approach amount (parameters E1, E2) and/or the overlap amount (parameter E21).
I don't use mazatrol for mills. Hope this helps....
:cheers:It's just a part..... cutter still goes round and round....
Reply With Quote
Posting Permissions
