584,814 active members*
5,303 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2007
    Posts
    54

    To modify or buy new?

    Hey all..

    I have a 2007 Dynatorch 5'x10' table and I'm looking to upgrade.

    I have a price from Dynatorch to upgrade with a few added goodies for about 10 k. My machine now has 3 servos so I'd be upgrading to the 4 and eliminating the jack shaft.

    If I buy new I'd be buying a 6'x12' machine but that machine is close to 27k with a few added features.

    My machine doesnt have a bunch of time on it but I'm guessing I could sell it for around 12,000.
    I have we-cim and cutting shop.
    Fairly certain I'll be staying with Dynatorch since I've had nothing but positive customer service from them.

    Thoughts suggestions??


    Thanks
    Chris

  2. #2
    Join Date
    Feb 2018
    Posts
    1

    Re: To modify or buy new?

    I know this is an old post but what did you decide to do? I'm kinda in the same situation with the same machine any advice would be appreciated.

  3. #3
    Join Date
    Feb 2007
    Posts
    22

    Re: To modify or buy new?

    Did you get any advice?? I currently in the same boat..

Similar Threads

  1. modify PMC WIth LadderIII
    By repbob in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 07-10-2011, 06:50 PM
  2. MPMaster Modify - G17
    By charger19690 in forum Post Processors for MC
    Replies: 6
    Last Post: 07-27-2010, 02:27 AM
  3. How to modify Fitting
    By five12dude in forum Hobby Discussion
    Replies: 4
    Last Post: 07-20-2009, 02:12 AM
  4. Modify STL in SW
    By DIFF OVER in forum Solidworks
    Replies: 0
    Last Post: 03-11-2009, 01:54 AM
  5. 31i-A5 which post to modify
    By jrobson in forum Fanuc
    Replies: 0
    Last Post: 02-27-2008, 12:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •