584,879 active members*
5,146 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Mori Seiki Machines > Mori Seiki lathes > MORI SEIKI NL3000- TURRET INDEXING ISSUE
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2013
    Posts
    3

    MORI SEIKI NL3000- TURRET INDEXING ISSUE

    While changing the back-up battery the panel was powered down. We have taken care of all of the alarms. We performed T-axis 0 procedure. The problem we are having now is that when the turret is indexing, at the end of the index is jumps slightly and we hear a clang from the clamp. How can we fix this issue? Any input will be appreciated.
    Thanks in advance.

  2. #2
    Join Date
    Dec 2013
    Posts
    3
    I need a procedure to line up the turret clamp, I belive it is just a hair off.

    Anyone who has powered off the control panel on a Mori Seiki NL 3000 while changing the backup battery should have encountered the same problems we are having. Anybody that has any experience with this please provide some input.
    Thanks.

  3. #3
    Join Date
    Aug 2011
    Posts
    2517
    a simple search for 'mori turret zero' returns several posts relating to the subject including.....

    http://www.cnczone.com/forums/mori-s...et-homing.html
    http://www.cnczone.com/forums/mori-s...ret-issue.html

  4. #4
    Join Date
    Jan 2013
    Posts
    7
    You must set some Data (PC-PRM) to activate Turret Adjust Mode (please find them in the Ladder Diagram manual).
    This Data are different from machine model to another.
    Data are "double paramenter" and must be activate with "maintenance procedure" Feed Hold+Edit Key Off/On

    Then while pressing Turret + or Turret - you can Clamp/Unclamp Turret.
    Then select Handle and select T in the axis selection
    Totare turret nearest to the n.1 cutting position (a bit in advance respect tte exact position).
    Then select ZRN mode
    Then keep press Turret Index (turret will rotate a lil bit then stop).
    ZRN procedure is done.
    Power Off/On and in manual mode rotate the turret and check.

  5. #5
    Join Date
    Feb 2009
    Posts
    6028
    With the mits its a little tricky.

    Sent from my G-Tab Quantum using Tapatalk

Similar Threads

  1. Mori Seiki SL603CMC/3000 Turret issue
    By WECtech in forum Mori Seiki lathes
    Replies: 8
    Last Post: 06-02-2017, 03:53 AM
  2. MORI SEIKI NL3000
    By christian59 in forum Mori Seiki Mills
    Replies: 0
    Last Post: 02-17-2014, 04:55 PM
  3. MORI SEIKI SL-25B TURRET INDEXING PROBLEM FANUC OT
    By ROHAN 1981 in forum Community Club House
    Replies: 4
    Last Post: 02-03-2014, 03:47 PM
  4. Mori AL-2 Turret Indexing and X Home Problem
    By krfrea in forum Mori Seiki lathes
    Replies: 4
    Last Post: 01-03-2011, 07:59 PM
  5. Mori Seiki NL3000 Gone Wild
    By joseavina76 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 08-06-2007, 09:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •