[ratmole]

Hi, looking for the ROM contents of an old panel saw computer for a SCM Machine.
The Computer model is XILIA X915, and the pcb board no is TX111A.

The ROM chips are marked:
GDT 0979, GDT 0980, GDT 0981
GDT 0982, GDT 0983, GDT 0984

If anyone has them please share!
PS. If someone has the service manual for this machine, or a schematic for the board please let me know.


Thanks.

[suske]

Hi, looking for the ROM contents of an old panel saw computer for a SCM Machine.
The Computer model is XILIA X915, and the pcb board no is TX111A.

The ROM chips are marked:
GDT 0979, GDT 0980, GDT 0981
GDT 0982, GDT 0983, GDT 0984

If anyone has them please share!
PS. If someone has the service manual for this machine, or a schematic for the board please let me know.


Thanks.

Huh, I just got an old XILIX X915VC2A PLC from some wood processing machine. In my case there is no any sign of life on CRT. Unfortunately ROM chip labels are different so I can not help you.

Backup battery dropped to 1.5V so it may be settup is lost but PLC should give some sign of life on CRT no mather of battery. Now whole machine is dead and useless so if someone can help in any way I will appreciate it much.

Thanks in advance.

P.S. Machine is SCM P170S wood grinder