504,488 active members
3,230 visitors online
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Feb 2014
    Posts
    1

    Exclamation Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

    I'm a IT guy helping out my brother in-law. He has a Weeke BP120 (circa 1999) that connected to a PC running Win98, Weeke 2000-IPC, and WoodWOP. The PC hard drive crapped out. I tried to retrieve data from it, but it was toast. I got him another hard drive and installed XP and WoodWOP. Weeke 2000-IPC floppies are missing (only have disk 1 of 2, ahh!). Need to get the Weeke 2000-IPC software, can anyone help?

    Also doing research it looks like Week 2000-IPC doesn't run on XP. Has anyone tried running it on XP or WIN7? It's my understanding that the software is a DOS based program/driver between the PC and the BP120. Could I just run it in WIN7 in compatibility mode.

    Any help would be appreciated, as my brother in-law is a small business owner. I have the manual to the BP-120, if any BP120 owners would like a copy, I could PDF it.

    Thanks
    GW

  2. #2
    Junior Member
    Join Date
    Aug 2013
    Posts
    3

    Re: Weeke BP 120 and Weeke 2000-IPC Win98 PC Crashed

    Hello,
    i have same problem and i want to know if you get the chance to exchange from 98 to XP






    Quote Originally Posted by glenn_wood View Post
    I'm a IT guy helping out my brother in-law. He has a Weeke BP120 (circa 1999) that connected to a PC running Win98, Weeke 2000-IPC, and WoodWOP. The PC hard drive crapped out. I tried to retrieve data from it, but it was toast. I got him another hard drive and installed XP and WoodWOP. Weeke 2000-IPC floppies are missing (only have disk 1 of 2, ahh!). Need to get the Weeke 2000-IPC software, can anyone help?

    Also doing research it looks like Week 2000-IPC doesn't run on XP. Has anyone tried running it on XP or WIN7? It's my understanding that the software is a DOS based program/driver between the PC and the BP120. Could I just run it in WIN7 in compatibility mode.

    Any help would be appreciated, as my brother in-law is a small business owner. I have the manual to the BP-120, if any BP120 owners would like a copy, I could PDF it.

    Thanks
    GW

Similar Threads

  1. Busellato vs Weeke
    By MARKC53 in forum Commercial CNC Wood Routers
    Replies: 14
    Last Post: 11-17-2017, 10:56 PM
  2. Mastercam V9 to Weeke Homatic 2000
    By richardanderson in forum Post Processor Files
    Replies: 3
    Last Post: 03-09-2015, 12:56 PM
  3. weeke bp30 num 750
    By maw2307 in forum Commercial CNC Wood Routers
    Replies: 4
    Last Post: 02-18-2012, 04:35 AM
  4. Microvellum to weeke
    By weeke_guy in forum Autodesk
    Replies: 0
    Last Post: 12-09-2011, 09:54 PM
  5. Weeke
    By Somerset CNC in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 12-06-2010, 08:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •