[CrisHooker29]

Hi I purchased a 3020T-DJ CNC machine about a week ago, and to date I have not been able to get my machine to work. If you have any experience in getting these things to work please private message me.

I have configured the machine, and the MACH3 Software exactly as directed. The machine still does not work. I contacted the seller, and have not received a response to date from the seller.

[martindsloan]

I Bought the SW from Mach 3 and then realized as I went to reload that I hadn't saved the setup files and found a site that, in fact, had the wrong pinouts... Found the SW that came with it and entered those to no availe. I am unsure as to how to proceed. I've opened the case after waiting for the company to get back to me on how to best diagnose or even a schematic w/wave forms or anything. So, Now after looking at some other pix and Posts I've decided to do it myself. I've now as of a couple of hours ago fabricated a couple of 4 pin test plugs that will allow some more secure testing points on the outputs of the axis + Spindle also, the PWM socket using the four pin plug for a Common computer speaker modified by inserting 2 extra wires in the empty's between 1&4 from another plug for something else. Attachment 282848Attachment 282850