504,054 active members
4,616 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jan 2014
    Posts
    6

    heidenehain tnc 355 system

    Hi ,

    everybody ,. I recovered the plc statement program , it not matching with machine function ,any good man can help
    me solve this. It is two axis x z a machine(gear shaving).Now the problem is that machine control not getting on,how to come to out from this, I am just new to this programming ,I can do it if some one little guide/hint me.I am just:drowning::drowning::drowning:
    E-MAIL: hsm10@in.com.

  2. #2
    Registered
    Join Date
    Dec 2008
    Posts
    23

    Re: heidenehain tnc 355 system

    You have to get machine to reference first, what error message appears when you try to reference machine

Similar Threads

  1. heidenehain tnc 355 system
    By Barjinder in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 02-26-2014, 08:35 AM
  2. Replies: 0
    Last Post: 01-19-2014, 02:18 PM
  3. Replies: 0
    Last Post: 01-06-2014, 11:15 PM
  4. Converting DSP controller system to Mach based system.
    By Marwell in forum Machines running Mach Software
    Replies: 0
    Last Post: 12-20-2008, 12:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •