585,938 active members*
3,775 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma osp 5020m to pc

Thread: Okuma osp 5020m to pc

Results 1 to 3 of 3
  1. 02-27-2014, 07:09 PM #1
    hondarider218
    hondarider218 is offline Registered
    Join Date
    Feb 2014
    Posts
    1

    Okuma osp 5020m to pc

    Im having troubles sending programs from the pc to the osp. I am able to send from the machine with no problems. If anyone out there might know something about my problem I would greatly appreciate any info. I am using a usb to db9 adapter..


    Thanks
    Reply With Quote Reply With Quote
  2. 04-14-2014, 02:56 PM #2
    jw12
    jw12 is offline Registered
    Join Date
    Mar 2009
    Posts
    31

    Re: Okuma osp 5020m to pc

    It might be in your cable i had same problem once and a wire was lose in my cable
    Reply With Quote Reply With Quote
  3. 04-18-2014, 06:46 PM #3
    Algirdas
    Algirdas is offline Member
    Join Date
    Mar 2009
    Posts
    1982

    Re: Okuma osp 5020m to pc

    If anyone out there might know something about my problem
    Description of serial interface settings is scaterred through Okuma manual. There are many versions of connection presented, not only just a PC one. There are more than 10 relevant parameters. It's a serious task to see entire situation of RS232 communication.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. osp 5020m error/alarm book
    By guydrisc in forum Okuma
    Replies: 6
    Last Post: 03-24-2017, 07:17 AM
  2. Cadet V4020 with 5020m Control Error Help
    By CNCoperator123 in forum Okuma
    Replies: 5
    Last Post: 12-11-2015, 08:31 AM
  3. 5020M Memory Upgrade Pricing
    By Mickey__D in forum Okuma
    Replies: 7
    Last Post: 03-14-2011, 01:56 AM
  4. Error 453 Alarm B Data word: radius 1 on 5020M control
    By Mickey__D in forum Okuma
    Replies: 2
    Last Post: 06-17-2010, 02:09 PM
  5. Okuma 5020M language change
    By greenery_fr in forum Okuma
    Replies: 3
    Last Post: 10-02-2009, 06:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules