as far as I know the machine has not had any trauma, booted up this morning, went to zero z-axis and the servo overload alarm popped up....can hand jog slowly, so got to zero...and running now, but get to about 3.5 inches away from machine 0 the overload alarm pops up...did not see any debris on ball screw or slides, any ideas would be appreciated, thank you.
Results 1 to 2 of 2
-
03-05-2014, 03:21 PM #1
Registered
- Join Date
- Sep 2012
- Posts
- 7
Need Help! TL-25 z-axis overload towards machine 0
-
03-14-2014, 08:18 AM #2
Registered
- Join Date
- Mar 2007
- Posts
- 23
First thing i would try is to turn off the machine and rotate ball screw by hand. If everything is mechanically ok it should turn freely. That would prove or rule out mechanical problems.
Reply With QuoteSimilar Threads
-
HAAS HL-2 Alarm 162 B Axis Overload
By dafowfidy in forum Haas LathesReplies: 1Last Post: 02-22-2011, 06:32 AM -
C Axis Motor Overload
By Paul Petersen in forum FadalReplies: 1Last Post: 12-19-2007, 01:11 PM -
Axis overload parameter????
By theemudracer in forum FanucReplies: 0Last Post: 11-13-2007, 05:40 AM -
Y-axis overload
By cdlenterprises in forum MetalWork DiscussionReplies: 3Last Post: 04-21-2007, 11:03 PM -
Help!!! Y axis overload won't go away
By soweebee in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 06-15-2006, 03:15 PM
Tags for this Thread
Posting Permissions
