I bought a small blower a while back & never was able to figure out what capacitor to get for it.
web search returned too technical info for my level
Ametek Rotron propimax 3BL part no 041037 series 763ZH
115 volt ac
60 hz
1 phase
.13 amp
3450 rpm
PH. SEQ
Cap 0.5 (with no u or F) so am I right in assuming it is .5F?
has a small wiring diagram [see photo (fixed type capacitor ?)]
I buy from digikey so if someone can point me to a solution, part no greatly appreciated.
Also which wire connects to black? yel or red?
Thanks in advance