[kurmay]

When i create a new igf file and in shape designing it ask DDT IMPORT

Who knows DDT file on AOT igf?

is it model file or database?

Thanks

[kurmay]

I think DDT is a drawing data file.
I found a sample.

<?xml version="1.0" encoding="UTF-8"?>
<machineSetupInfo>
	<version>1.00</version>
	<unit>mm</unit>
	<machine>L</machine>
	<spec>
		<precision>OFF</precision>
		<spindle no="1" type="opposite" />
		<tailstock type="non" sizingno="10" />
		<origin no="1" />
		<turret no="1" />
	</spec>
	<machiningEnvironment no="1">
		<model no="1" type="JAW">
			<shape type="parameter">
				<chucking>OD</chucking>
				<L1>38.000</L1>
				<D1>95.000</D1>
				<L2>0.000</L2>
				<D2>0.000</D2>
				<CX>42.760</CX>
				<width>35.000</width>
				<number>3</number>
			</shape>
			<matrix>1,0,0,0,0,1,0,0,0,0,1,0,0,0,38.000,1</matrix>
		</model>
		<model no="2" type="BLANK">
			<shape type="rotatedshape">
				<vector>0,0,1</vector>
				<profile>
					<start>0.000,53.000</start>
					<line>6.200,53.000</line>
					<arc>6.200,52.000,90.000</arc>
					<line>7.200,17.540</line>
					<arc>8.200,17.540,-90.000</arc>
					<line>20.380,16.540</line>
					<arc>20.380,15.540,90.000</arc>
					<line>21.380,-12.200</line>
					<arc>20.380,-12.200,90.000</arc>
					<line>0.000,-13.200</line>
					<line>0.000,53.000</line>
				</profile>
			</shape>
			<matrix>1,0,0,0,0,1,0,0,0,0,1,0,0,0,51.200,1</matrix>
		</model>
	</machiningEnvironment>
	<OSPSetupParameter no="1">
		<presentOrigin>1</presentOrigin>
		<jawParameter>
			<chucking>OD</chucking>
			<barrierShape>
				<L1>38.000</L1>
				<D1>95.000</D1>
				<L2>0.000</L2>
				<D2>0.000</D2>
				<CX>42.760</CX>
				<CZ>38.000</CZ>
			</barrierShape>
		</jawParameter>
	</OSPSetupParameter>
</machineSetupInfo>