Code:
<?xml version="1.0" encoding="UTF-8"?>
<machineSetupInfo>
<version>1.00</version>
<unit>mm</unit>
<machine>L</machine>
<spec>
<precision>OFF</precision>
<spindle no="1" type="opposite" />
<tailstock type="non" sizingno="10" />
<origin no="1" />
<turret no="1" />
</spec>
<machiningEnvironment no="1">
<model no="1" type="JAW">
<shape type="parameter">
<chucking>OD</chucking>
<L1>38.000</L1>
<D1>95.000</D1>
<L2>0.000</L2>
<D2>0.000</D2>
<CX>42.760</CX>
<width>35.000</width>
<number>3</number>
</shape>
<matrix>1,0,0,0,0,1,0,0,0,0,1,0,0,0,38.000,1</matrix>
</model>
<model no="2" type="BLANK">
<shape type="rotatedshape">
<vector>0,0,1</vector>
<profile>
<start>0.000,53.000</start>
<line>6.200,53.000</line>
<arc>6.200,52.000,90.000</arc>
<line>7.200,17.540</line>
<arc>8.200,17.540,-90.000</arc>
<line>20.380,16.540</line>
<arc>20.380,15.540,90.000</arc>
<line>21.380,-12.200</line>
<arc>20.380,-12.200,90.000</arc>
<line>0.000,-13.200</line>
<line>0.000,53.000</line>
</profile>
</shape>
<matrix>1,0,0,0,0,1,0,0,0,0,1,0,0,0,51.200,1</matrix>
</model>
</machiningEnvironment>
<OSPSetupParameter no="1">
<presentOrigin>1</presentOrigin>
<jawParameter>
<chucking>OD</chucking>
<barrierShape>
<L1>38.000</L1>
<D1>95.000</D1>
<L2>0.000</L2>
<D2>0.000</D2>
<CX>42.760</CX>
<CZ>38.000</CZ>
</barrierShape>
</jawParameter>
</OSPSetupParameter>
</machineSetupInfo>