[enjoymfg]

I just Bough a Miyano BNC12S Fanuc OT and the B axis doesn't do what I tell it to do
it doesn't
like the G110 (if I can Only able to use this that will solve all my problems) command or the G102 or G103
The G101 it reads but only 2 or 3 lines and it ends the canned cycle
please if some one can help me out with the parameters
thank you in advance

[SGARCIAM]

Did you get a copy of the parameters ?
I am looking for the electrical diagrams for this machine. I can send you a copy of the ladder diagram.
It has no address descriptions.

- - - Updated - - -

Did you get a copy of the parameters ?
I am looking for the electrical diagrams for this machine. I can send you a copy of the ladder diagram.
It has no address descriptions.

[generaldisarray]

the Miyanos that use the 0T control and the g110 are a super pain in the butt.
If you have the manuals, they do not behave exactly as they describe. The g101 behaves in a unpredictable manner for me and i wont use it.
you have to have
G110 T71 or whatever you are using for the b offset, on the first line
then
G110 Bx on the next line
this is moving away from B ref return pos. The workholding must be open to move in the B- direction.

sample pickoff

N170T808(CUTOFF)
(HOLDER #ISCAR SGTHR 19-3)
(INSERT #GTR 3-15D IC354)
(TOOL SET LENGTH 1 5/8")
(DW 1480)
G97S800M203
G0X1.125Z1.
G99
Z-0.012
M117
G110T71
G110B0.
M118
M08
G04X0.5
G1X1.1F0.001
X0.6
M09
G110T70 (T70 cancels the B offset)
G110G0B-2.5 (return to B0 would cause Z overtravel on subspindle operations)
G0X7.
Z4.
M205
M25
M00
~
~
~
final tool of sub ops with part catcher routine

N200(FINISH FACE AND TURN)
(HOLDER #SANDVIK SVJBR 12 2B)
(INSERT #VBMT 2[1.5]1-UF 1025)
(SCREW # 5513 020-03)
(TOOL SET LENGTH BUMP TO STOP)
(DW 4565)
T2222
G97S1190M194
M191
G0X1.1232Z-1.M8
Z.0233
G50S2000
G96S350
M191
G1X1.0232F.0025
X.9858Z.0046
G3X.9637Z0.0R0.0111
G1X.875
Z-.05
G0Z-1.
X4.
M9
G0X6.Z-1.
T0200
M105
M09
G110B0.0
G04X0.5
M35
G04X1.0
M117
G04X2.
M36
M213
M30