Howdy,
Do y'all know what sized wrench the Tormach 1100 drawbar takes? I need to checkout the pawn shops for a ratcheting box wrench for it. They usually run about $2 at a good pawn shop
Thank you,
kr
Howdy,
Do y'all know what sized wrench the Tormach 1100 drawbar takes? I need to checkout the pawn shops for a ratcheting box wrench for it. They usually run about $2 at a good pawn shop
Thank you,
kr
http://www.parmarng.org/freeidaho/default.html
http://xlforum.net/vbportal/forums/showthread.php?t=999415
Not sure what size it is, but mine has a square head. i just use a metric adjustable spanner for it.
Will
12-point sockets/box wrenches work fine on square heads...
CAD, CAM, Scanning, Modelling, Machining and more. http://www.mcpii.com/3dservices.html
My series 1 is 13mm.
13 mil square the ceapo that come with it works fine, open end wrench is fine
Excellent. By my calculations, 13mm square turns out to be 15.9mm hex wrench, so 16mm (12 pt). It is also exactly 5/8" hex wrench (12 pt).
The ratcheting box end wrench is the neatest thing since ratchet wrenches. I will stop by the pawn shop tomorrow and pick up a 5/8" ratcheting end wrench for a couple bucks.
Thank you very much,
kr
http://www.parmarng.org/freeidaho/default.html
http://xlforum.net/vbportal/forums/showthread.php?t=999415
I need to make a 13 mm socket, brass hammer combo for my drawbar.
Add that to my 'to-do' list.