When i started working as a welder at our small mechanical workshop in norway i was the only one who had education in cnc programming. During the past years we had many different self taught operators and some nasty crashes. So when i started i knew that i had some alignment to do. I checked the turret inclination and offset, the main spindle and the tailstock. Eweryting was out of alignment. The turret had turned as mutch as 0.35mm out of its correct position.
The problem is that i have not done this in a long time and not in a doosan before so i have a few questions. i couldent find the adjusting screws for the main spindle as they are shown in the instruction manual. Then to the turret inclination. I could not find the 2 bolts and the 2 adjusting screws as they are shown in the manual. Im not shure if the drawings in the manual are inaccurate or what it is but i just cannot find the screws. Has anyone else had this problem or is it just me?
I called our contact at the company that sold the machine but they did not want to help me so all help is mutch appreciated.
Sent from my SM-N9005 using Tapatalk