HI,
I'm working on a CNC machine using TB6560 and a manual controller (pic attached below). Well the funny error is, when i press Z+ or Z- the stepper motor is rotating in the same direction. Is it a problem with the controller or the board?
Results 1 to 1 of 1
-
03-26-2014, 08:57 AM #1
Registered
- Join Date
- Mar 2014
- Posts
- 1
Manual controller for TB6560 is making funny errors
Reply With QuoteSimilar Threads
-
Sunwin TB6560 5 axis driver and no manual!!
By avirostick in forum Stepper Motors / DrivesReplies: 4Last Post: 07-10-2013, 12:57 AM -
TB6560 5 axis controller & XINFUTAI VFD
By cime2012 in forum CNC Machine Related ElectronicsReplies: 0Last Post: 10-21-2012, 10:30 PM -
Mac 3 setup for TB6560 controller board
By davidarf in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 07-03-2012, 09:05 PM -
Interfacing MO-CON501/Little blue TB6560 manual controller
By Mike4703 in forum CNC Machine Related ElectronicsReplies: 53Last Post: 10-22-2011, 04:08 AM -
TB6560 3-axis driver manual control
By kish89 in forum Stepper Motors / DrivesReplies: 4Last Post: 12-08-2009, 10:19 PM
Tags for this Thread
Posting Permissions
