584,846 active members*
4,630 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > Hardinge chnc1 parts for sale
Results 1 to 16 of 16
  1. #1
    Join Date
    Oct 2006
    Posts
    41

    Hardinge chnc1 parts for sale

    I have hardinge chnc1 parts for sale . All the electrical parts and some of the air driven parts are getting changed out. Leave a post with email and as I get a chance I will get in touch with you. Just looking to get enough for new aftermarket electrical and drives

  2. #2
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    looking for CHNC II 16c collet closer parts / also i have a CHNC for parts
    Thanks
    ed

  3. #3
    Dear I need index stop mechanism control, in this mechanism I need one pneumatic control 4 way valve, R481-12 12 volt Dc valve made by CLIPPARD and one valve made by MEAD Chicago HT-100P, Please contact me at [email protected]. Tanks Masroor Anwar

  4. #4
    Join Date
    May 2009
    Posts
    7

    Re: Hardinge chnc1 parts for sale

    would you have a plate to cover the micro switches on a hardinge chnc 1 i could send you a picture of what i need
    Attached Thumbnails Attached Thumbnails 0113201437_HDR.jpg  

  5. #5
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    Clamdigger,
    No but still have other parts ! Also have parts for a CHNC II with 810T control all boards ext.
    Thanks Ed

  6. #6
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    Clam digger,
    Found one !!! Came off a CHNC I 810T control . Got plate with switches and cover . [email protected]

    Ed

  7. #7
    Join Date
    Aug 2012
    Posts
    126

    Re: Hardinge chnc1 parts for sale

    Hi,

    Have you still got the Interface board?

    Thanks, Allen.

  8. #8
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    Give me a #
    [email protected]

  9. #9
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    Allen,
    Yes ! Want to make sure they match !

    Ed
    [email protected]

  10. #10
    Join Date
    May 2009
    Posts
    7

    Re: Hardinge chnc1 parts for sale

    Attachment 435806 hardinge chnc1 i am looking to buy L in the diagram

  11. #11
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    Looking for a X axis ac motor for a CHNC I
    Wiring diagram A13B-0139-8540
    Control GEF OTB
    CN-3085-T
    [email protected]

    Do have spare DC motors for CHNC II

  12. #12
    Join Date
    Nov 2011
    Posts
    39

    Re: Hardinge chnc1 parts for sale

    CHNC I can't read the tag on the X axis AC fanuc motor to replace ! Can someone help please !
    Thanks
    Ed

  13. #13
    Join Date
    Sep 2010
    Posts
    4
    Quote Originally Posted by Edwin Murch View Post
    looking for CHNC II 16c collet closer parts / also i have a CHNC for parts
    Thanks
    ed
    Looking for the sheet metal base for early chnc

  14. #14
    Join Date
    Aug 2012
    Posts
    126
    Hi
    Do you still need the I.d tags for the servo drives?, I removed mine for both
    X and Y motors so I could get info for a retrofit,
    And can sen pictures if you wish,

    Allen

  15. #15
    Join Date
    Jan 2009
    Posts
    0
    Quote Originally Posted by Edwin Murch View Post
    Allen,
    Yes ! Want to make sure they match !

    Ed
    [email protected]
    Don’t know if you found one, but unless you want to keep it all stock, I replaced that whole air assembly from Amazon for like $38. Nanpu I think is name. You loose your low-level alarm switch but what the hell. Actually I’m writing because with the stocker I had a problem with water getting past the drier cup and accumulated in the mist feed cup. Problem is, it draws up a tube from the bottom so ya end up feeding water, not oil. Not good.

  16. #16
    Join Date
    Feb 2010
    Posts
    81

    Re: Hardinge chnc1 parts for sale

    Looking for the turret position switch/encoder for a CHNC II under the cover on the cross slide. Mine is encased in a resin body with 6 wires.

Similar Threads

  1. Videos of my old CHNC1 making parts.
    By nate in forum Hardinge Lathes
    Replies: 6
    Last Post: 03-16-2013, 08:52 AM
  2. hardinge chnc 1 precision parts up for sale
    By hornby chopper in forum Bridgeport / Hardinge Mills
    Replies: 4
    Last Post: 07-29-2012, 05:59 AM
  3. Looking for /chnc1 parts
    By gdgambler in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 05-17-2012, 05:50 PM
  4. 3x Hardinge HNC lathes for sale in CT
    By keitholivier in forum Hardinge Lathes
    Replies: 5
    Last Post: 03-31-2009, 01:21 AM
  5. Hardinge CHNC4 for retrofit or sale???
    By cbucner in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 05-13-2006, 12:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •