I would greatly appreciate the G code to mill a simple arc using G41 Cutter Compensation. A drawing is attached.
Note! If any additional information is required, please contact me by email or phone.
Many Thanks,
Bob Adams
989 798 6581
I would greatly appreciate the G code to mill a simple arc using G41 Cutter Compensation. A drawing is attached.
Note! If any additional information is required, please contact me by email or phone.
Many Thanks,
Bob Adams
989 798 6581
N1 G00 G40 G80 G91 G28 Z0
T10 M06
G00 G90 X3.5 Y0 S2000 M03
G43 Z0.1 H10 M08
G01 Z-0.5 F10.
G41 X4.0 F20. D10
G03X-4.0 I-4.0
X-3.0 I0.5
G02 X3.0 I3.0
G03 X4.0 I0.5
G01 G40 X3.5
G00 Z0.1
G91 G28 Z0
G90 M30
%
Are you cutting a slot of this shape or the outside? What cutter diameter?